Home > Knowledge > Content
How to maintenance aluminum sheet?
- Sep 21, 2018 -

The specific cleaning steps for the aluminum plate are as follows:

1. Rinse the surface of the board with plenty of water;

2. Gently wipe the surface of the test board with a soft cloth dampened with water-diluted detergent;

3. Rinse the surface with plenty of water to wash away the dirt;

4. Check the board surface and wash it with detergent for the place that is not cleaned;

5. Rinse the surface with clean water until all the detergent has been washed away.

Note: Do not clean the hot plate surface (when the temperature exceeds 40 °C), because the excessive evaporation of moisture is harmful to the baking finish!

Special attention should be paid to the selection of suitable detergents. A basic principle is to use neutral detergents! Do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide or sodium carbonate, strong acid detergents, abrasive detergents and paint-soluble detergents.